Koolance CPU-200G - Manual

CPU-200 Cooler Installation Guide v 2.00
CPU-200 Cooler Installation Guide
The most prominent liquid cooler is also the easiest
to install.
Apply thermal interface compound directly to the
CPU die. Do not add more than is necessary to cover
it with a very thin layer.
Remove the protective film from the bottom of
the CPU cooler.
Insert the temperature sensor into either
bottom groove on the CPU cooler.
Apply metal tape to keep the temperature
probe in place. Do not stick metal tape to the
the raised (polished) portion of the CPU cold
plate.
You can use a zip-tie to further secure the
temperature probe to the CPU tubing.
CAUTION : Be sure to attach the Koolance temperature probe to the
CPU cooler during installation. The safety features of your system
may not function properly without the correct placement of this probe.
!