Koolance ERM-3K4U5 - Manual (Page 10)

5 User Manual
System Settings
By default, the ERM-3K4U automatically adjusts fan speeds based on the liquid
temperature inside the reservoir. For actual CPU temperatures, please refer to your
motherboard’s BIOS, or 3rd-party software.
The Koolance system alarm will sound if the reservoir sensor gets too high
(default: 55ºC / 131ºF). While alarming, the radiator fans will increase to 100%
power. This temperature is adjustable (See “LED Display - Alarm Settings”).
For the option of automatic shutdown, Koolance recommends confi guring each
connected computer in BIOS or 3rd-party OS software to shutdown based on CPU
temperature or another available component.
LED Display - Fan Speed
This option adjusts the radiator fan speed. Higher speeds can improve performance,
but will produce more noise. There is 1 automatic and 10 manual fan settings
(1-10). Press the
▲ or ▼ buttons to cycle through these settings, or hold down
an arrow to skip to the highest or lowest mode directly.
Automatic mode will adjust the fans for you based on temperature values from the
primary reservoir sensor. automatic mode is reached by lowering the fan setting
to “0” (Aut / A1 will be displayed).
LED Display Panel
The front ERM-3K4U LED Display allows for visual monitoring of the Koolance
sensor temperature, adjustment of the alarm, and adds 10 manual fan speeds to
the default automatic setting.
Temperature Value
Display in ºC or ºF
Increase Fan Speed
Decrease Fan
Speed