Koolance LIQ-702YL-B User Manual

Page 2

Advertising
background image

Koolance MSDS – LIQ-702 Coolant Fluid

4. First Aid Measures

In case of eye contact: Rinse thoroughly with plenty of water for at least 20 minutes. If
irritation remains, consult a medical doctor immediately.

In case of skin contact: Remove contaminated clothing. Wash with soap and plenty of
water for at least 20 minutes. If irritation remains, consult a medical doctor immediately.

If inhaled: Move person to fresh air. If not breathing, give artificial respiration and
immediately contact emergency medical assistance.

If ingested: Never give anything by mouth to an unconscious person. Rinse mount with
water and consult a medical doctor immediately.

Other medical attention: Medical persons should be aware of protective measures for handling.
Potential health effects: May be harmful or fatal if swallowed.

5. Fire-Fighting Measures

Flash Point: 118°C (Cleveland open cup)

Suitable extinguishing media: Water spray, alcohol-resistant foam, dry chemical, carbon
dioxide

Specific hazards arising from the chemical: No data available

Special protective equipment for fire fighters:
- Use water spray to cool unopened containers.
- Fire fighters should enter area wearing respiratory protection and protective equipment.

6. Accidental Release Measures

Personal Precautions:

Ensure adequate ventilation.

Remove all sources of ignition.

Avoid contact with skin and eyes.

Avoid inhalation of vapor, mist, or gas.

Environmental Precautions:

Follow local regulations.

Methods and materials for containment and clean-up:

Collect with non-combustible absorbent materials (sand and soil).

7. Handling and Storage

Precautions for safe handling:

Wear protective gloves, clothing, and eye/face protection.

Do not spray on an open flame or other ignition source.

Provide forced air ventilation in tanks and confined spaces.

Avoid contact with skin and eyes.

Avoid inhalation of vapor, mist, or gas.

Keep away from sources of ignition. No smoking.

Conditions for safe storage:

Keep container tightly closed.

Keep in a dry and well-ventilated place.

Keep cool.

Avoid direct sunlight, heat sources, and strong oxidizing agents.

8. Exposure Control / Personal Protection

Conditions for safe storage:

2 of 5

Advertising
This manual is related to the following products: