Ride on, Tri-line saddlebag lid accents for ‘14 touring – Kuryakyn 6905 TRI-LINE SADDLEBAG LID ACCENTS for 14 TOURING User Manual
Page 2
Advertising
PAGE
2
TEST FIT:
STEP 3
Position the Right Tri-Line Saddlebag Lid Ac-
cent as shown in PIC 2. Use masking tape to
make alignment marks; remove the Right Tri-
Line Saddlebag Lid Accent.
INSTALL:
STEP 4
Use your fingernail to rub the adhesive backing; this will activate the adhesive. Remove and dis-
card the backing.
STEP 5
Using the marks made in
STEP 3
, align the Right Tri-Line Saddlebag Lid Accent and press it into
place for one minute; full bonding will occur after 24 hours. Remove and discard the masking
tape.
TRI-LINE SADDLEBAG LID ACCENTS for ‘14 TOURING
INSTALLATION
Ride On!
PIC 1
USE MASKING TAPE TO MAKE ALIGNMENT MARKS
Advertising