Kuryakyn 8885 TAPERED ADAPTER for 10-UP XL FWD CONTROLS - Manual (Page 2)

PAGE
2
STEP 2 Remove the stock peg from the clevis. Pay attention to any spacers or washers installed between
the male mount on the peg and the clevis, it may be helpful later. Set this hardware aside, it will
be reused.
STEP 3
Install the new tapered adapter using any spacers or washers removed in Step 2. Line up the hole
on the male mount on the adapter with the hole in the clevis.
STEP 4
Secure the tapered adapter in the clevis using the OEM hardware. Check that the tapered adapter
is installed correctly and the tapered adapter is able to fold upward.
STEP 5
Install the Küryakyn footpegs that require a tapered adapter as per the instructions with the
footpegs.
FOOTPEGS MUST BE INSTALLED SO THEY WILL FOLD UPWARD AND
REARWARD IF HIT BY ANY OBJECT. FAILURE TO ADJUST THE FOOTPEGS
TO OPERATE IN THIS MANNER COULD RESULT IN SERIOUS INJURY OR
DEATH.
Ride On!
TAPERED ADAPTER
INSTALLATION