Ride on, Mach 2 co-ax air cleaner, Installation – Kuryakyn 9568 MACH 2 CO-AX AIR CLEANER KIT User Manual
Page 3
PAGE
3
STEP 10
Install the screen mesh inside the Mach 2 cage and hold in place over the air filter
installed in Step 9.
STEP 11
Secure using the chrome 1/4”-20 x 3/4" Socket Head Cap Screws. PIC 7 Tighten
all
hardware
.
STEP 12
Check all hose connections and tighten all hardware. Rotate the throttle
open and make sure it returns correctly before starting the motorcycle.
ROTATE THROTTLE AND CHECK THAT IT MOVES FREELY AND
RETURNS TO CLOSED BEFORE STARTING BIKE. FAILURE OF
THE THROTTLE TO RETURN COULD RESULT IN LOSS OF
CONTROL CAUSING SERIOUS INJURY OR DEATH.
It is the installer’s responsibility to ensure that all of the fasteners (including
pre-assembled) are tightened before operation of the motorcycle. Küryakyn will
not provide warranty coverage on products or components lost due to improper
installation or lack of maintenance. Periodic inspection and maintenance are
required on all fasteners.
Ride On!
MACH 2 CO-AX AIR CLEANER
INSTALLATION
PIC 7