Kuryakyn 1387 WINDSHIELD TRIM for 14-UP TOURING - Manual

THANK YOU FOR CHOOSING K ϋ RYAKYN!
PROTECT YOURSELF AND OTHERS FROM POSSIBLE INJURY AND PROPERTY DAM-
AGE OR LOSS. PAY CLOSE ATTENTION TO ALL INSTRUCTIONS, WARNINGS, CAU-
TIONS, AND NOTICES REGARDING THE INSTALLATION, USE, AND CARE OF THIS
PRODUCT.
MAKE SURE THE FOLLOWING PARTS HAVE BEEN INCLUDED IN THE KIT:
1 Windshield Trim
1 Rubber Gasket
1 Hardware Kit containing:
1 1/4”-20 X 2” Button Socket Head Cap Screw
2 1/4”-20 X 5/8” Button Socket Head Cap Screw
1 Installation Instructions
TOOLS SUGGESTED:
Set of Torx wrenches, set of hex bit sockets, in-lbs torque wrench
STEP 1
Read and understand all steps in the instructions before starting the installation.
Park the motorcycle on a hard, level surface and turn off the ignition.
STEP 2 Remove the three Torx screws from the front of the fairing; set them aside, they will
not be reused. The center screw is longer than the two outside screws.
STEP 3
Carefully position the Windshield Trim on the fairing and align the screw holes. En-
sure the Rubber Gasket remains in place.
STEP 4 Thread the included 1/4”-20 X 2” Button Socket Head Screw in the middle screw
hole; leave it loose for now.
STEP 5 Thread the two included 1/4”-20 X 5/8” Button Socket Head Screws in the outer
screw holes; leave the screws loose until all have been started in their threads.
Tighten the center screw followed by the two outside screws.
STEP 6 Tighten all three screws and torque them to 25-30 in-lbs (2.8-3.4 Nm).
INSTALLATION
CUSTOMER SERVICE
877.370.3604 (toll free)
INSTALLATION QUESTIONS
[email protected]
or call 715.247.2983
LIMITED WARRANTY
Küryakyn warrants that any Küryakyn products
sold hereunder, shall be free of defects in
materials and workmanship for a period of one
(1) year from the date of purchase by the
consumer excepting the following provisions:
● Küryakyn shall have no obligation in the event
the customer is unable to provide a receipt
showing the date the customer purchased the
product(s).
● The product must be properly installed,
maintained and operated under
normal conditions.
● Küryakyn makes no warranty, expressed or
implied, with respect to any gold plated
products.
● Küryakyn shall not be liable for any
consequential and incidental damages, including
labor and paint, resulting from failure of a
Küryakyn product, failure to deliver, delay in
delivery, delivery in nonconforming condition, or
for any breech of contract or duty between
Küryakyn and a customer.
● Küryakyn products are often intended for use in
specific applications. Küryakyn makes no
warranty if a Küryakyn product is used in
applications other than intended.
● Küryakyn electrical products are warranted for
one (1) year from the date of purchase by the
consumer. L.E.D.’S contained in components of
Küryakyn products will be warranted for defects
in materials and workmanship for 3 years from
the date of purchase where as all other
components shall be warranted for one(1) year.
This includes, but is not limited to; control
modules, wiring, chrome & other components.
● Küryakyn makes no warranty of any kind in
regard to other manufacturer¹s products
distributed by Küryakyn. Küryakyn will pass on
all warranties made by the manufacturer and
where possible, will expedite the claim on behalf
of the customer, but ultimately, responsibility for
disposition of the warranty claim lies
with the manufacturer.
ABOUT OUR CATALOG
For purchasing Küryakyn® products, you
can receive a complete catalog free of charge.
Send the Proof-of-Purchase below with your
address to: Küryakyn
454 County Road V V
Somerset, WI 54025-9031
Please indicate either Accessories Catalog for
Harley-Davidson® or GL & Metric Cruisers.
Be sure to ask your local dealer about other
Küryakyn® products, the motorcycle parts and
accessories designed for riders by riders.
©2005 Küryakyn USA® All Rights
reserved.
WINDSHIELD TRIM for ‘14-UP TOURING
1387-21HD-0214
This indication alerts you to the fact that ignoring the
contents described herein may negatively affect product
performance and functionality or damage the product itself
or the product to which it is being attached.
1387
Ride On!
These installation instructions contain important information.
Ensure that the end user receives this copy and is aware of its
importance for future reference.
Avoid damage to the motorcycle. Protect painted surfaces
with a soft cloth or service cover.
It is the end user’s responsibility to ensure that all of the fas-
teners (including pre-assembled) are tightened before opera-
tion of the motorcycle. Küryakyn will not provide warranty
coverage on products or components lost due to improper
installation or lack of maintenance. Periodic inspection and
maintenance are required on all fasteners.