Kuryakyn 7796 BAT BROW Fairing ACCENT User Manual

I n s ta l l at i o n, Parts included, Procedure

Advertising
background image

I N S TA L L AT I O N

CUSTOMER SERVICE

877.370.3604 (toll free)

INSTALLATION QUESTIONS

[email protected]

or call 715.247.2983

LIMITED WARRANTY

Küryakyn warrants that any Küryakyn products sold

hereunder, shall be free of defects in materials and

workmanship for a period of one (1) year from the

date of purchase by the consumer excepting the

following provisions:

Küryakyn shall have no obligation in the event

the customer is unable to provide a receipt showing

the date the customer purchased the product(s).

The product must be properly installed,

maintained and operated under normal conditions.

Küryakyn makes no warranty, expressed or

implied, with respect to any gold plated products.

Küryakyn shall not be liable for any consequential

and incidental damages, including labor and

paint, resulting from failure of a Küryakyn product,

failure to deliver, delay in delivery, delivery in

nonconforming condition, or for any breech of con-

tract or duty between Küryakyn and a customer.

Küryakyn products are often intended for use

in specific applications. Küryakyn makes no

warranty if a Küryakyn product is used in

applications other than intended.

Küryakyn electrical products are warranted for

one (1) year from the date of purchase by the con-

sumer. Components of Küryakyn products containing

L.E.D.s will be warranted for defects in materials and

workmanship for 3 years from the date of purchase.

Küryakyn makes no warranty of any kind in

regard to other manufacturer’s products distributed

by Küryakyn. Küryakyn will pass on all warranties

made by the manufacturer and where possible, will

expedite the claim on behalf of the customer,

but ultimately, responsibility for disposition of the

warranty claim lies with the manufacturer.

ABOUT OUR CATALOG

You’ll find all our innovations for H-D, GL and

Metric Cruisers in our annual catalogs. Order

online today–select the ”CATALOGS” icon. Each

Küryakyn

®

product comes with a Proof-of-Purchase

good for a complimentary catalog.

Details in packaging.

Be sure to ask your local dealer about other

Küryakyn

®

products, the motorcycle parts and

accessories designed for riders by riders.

©2005 Küryakyn USA

®

All Rights reserved.

PARTS INCLUDED

1 Bat Brow Fairing Trim

1 Alcohol Pad

1 Installation Instructions

Please read and understand entire instructions before starting installation.

ThANk YOU fOR ChOOSING küRYAkYN!

IN ORDER TO PROTECT YOU AND OThERS fROM POSSIBLE INjURY

AND/OR PROPERTY DAMAGE OR LOSS, PLEASE PAY CLOSE ATTENTION

TO ALL INSTRUCTIONS, WARNINGS, CAUTIONS AND ATTENTION NOTES

REGARDING ThE USE AND CARE Of ThIS PRODUCT.

ATTENTION!

This indication alerts you to the fact that ignoring the contents described herein

may negatively affect product performance and functionality.

STRICTLY OBSERVE ThE fOLLOWING GUIDELINES IN ORDER TO USE ThE

PRODUCT PROPERLY AND AVOID POTENTIALLY DANGEROUS ACCIDENTS.

PROCEDURE

STEP 1

Read and understand all steps in the instructions before starting the installation. Park

the motorcycle on a hard, level surface; turn off the ignition and allow the engine to cool.

STEP 2

Test fit the new Bat Brow on the fairing above the headlight (PIC 1). Make

temporary marks with masking tape to help re-align the accent on the fairing for final

installation.

STEP 3

Once you have found the best fit, clean the mounting area on the fairing with the

supplied alcohol pad.

ATTENTION!

Ensure the area of installation is free of grease, oil, dirt or other debris to ensure

proper adhesion. Küryakyn WILL NOT issue a warranty on any parts lost due to improper

installation.

STEP 4

Take the Bat Brow and rub the tape backing to activate the adhesive. Remove the

adhesive backing.

STEP 5

Line up the Bat Brow with any marks

made in Step 2. Press and hold the accent in place

for one full minute. Full bonding will occur in 24

hours.

ATTENTION!

The adhesive will not bond correctly

if applied at temperatures less than 50°F. Do not

attempt this installation in temperatures less than

50°F.

7796-11HD-0909

B AT B R O W fA I R I N G A C C E N T

7 7 9 6

fITS: ALL ’96-UP ELECTRA GLIDES AND STREET GLIDES

PIC. 1

Advertising