Kuryakyn 9513 VELOCIRAPTOR AIR CLEANER KIT - Manual (Page 3)

PAGE
3
STEP 8
Remove the backing from the included adhesive backed gasket and attach it to the breather
adapter making sure the holes line up with the three threaded
holes in the adapter.
STEP 9
Completely disassemble the Velociraptor Assembly. Make note
as to how it is assembled, it will help for reassembly. FIG 1
STEP 10
Locate the velocity stack (chrome cone) from the Velociraptor
Assembly. Line the holes up from the velocity stack to the
aluminum adapter assembly (only three of the holes will line
up to the adapter). PIC 4 Secure using the three
1/4”-20 x 5/8" Socket Head Cap Screws.
STEP 11
Snap the black Super Ring into place on the installed Velociraptor. Ensure it is
securely snapped into place before continuing with the installation. PIC 6.
STEP 12
Place the filter into the Velociraptor, secure with the chrome Steel Mesh and
the Outer Ring. Line up the holes in the Mesh with those of the Outer Ring,
secure with five 1/4”-20 x 1/2” Socket Head Cap Screws.
STEP 13
Double check the tightness of all related fasteners, check for hose
clearance and check throttle for correct operation, making sure it
returns properly, before starting bike.
ROTATE THROTTLE AND CHECK THAT IT MOVES FREELY
AND RETURNS TO CLOSED BEFORE STARTING BIKE.
FAILURE OF THE THROTTLE TO RETURN COULD RESULT IN
LOSS OF CONTROL CAUSING SERIOUS INJURY OR DEATH.
It is the installer’s responsibility to ensure that all of the fasteners (including
pre-assembled) are tightened before operation of the motorcycle. Küryakyn will
not provide warranty coverage on products or components lost due to improper
installation or lack of maintenance. Periodic inspection and maintenance are
required on all fasteners.
Ride On!
VELOCIRAPTOR AIR CLEANER
INSTALLATION
ONLY THESE THREE HOLES LINE UP
USE 5/8” CAP SCREWS HERE
PIC 5
FIG 1
CHROME CONE
PLASTIC CONE
FILTER ELEMENT
MESH SCREEN
OUTER TRIM RING
PIC 6
SUPER RING