Ride on, Plug in drivers backrest – Kuryakyn 8931 PLUG-N-GO DRIVERS BACKREST for GL 1800 User Manual
Page 5
STEP 19
To use the Backrest Pouch as a carry bag, simply pull it off the Backrest Pad (it is attached with
hook and loop strips), and attach the hook strips on the Pouch to the loop strips on the Pouch
Backer. PIC 13 Remove the shoulder strap from the small pouch on the Backer and attach the
snaps to the “D” rings on the Backrest Pouch. PIC 14
STEP 20
Attach the Backrest Pouch to the Backrest by removing the Backer from the Pouch (it is attached
with hook and loop strips). Press the hook strips on the Pouch onto the loop strips on the back of
the Backrest.
Ride On!
PLUG IN DRIVERS BACKREST
INSTALLATION
PAGE
5
It is the installer’s responsibility to ensure that all of the fasteners
(including pre-assembled) are tightened before operation of the motorcy-
cle. Küryakyn will not provide warranty coverage on products or compo-
nents lost due to improper installation or lack of maintenance. Periodic in-
spection and maintenance are required on all fasteners.
PIC 14
SNAP THE STRAP TO THE “D” RINGS
PIC 13
ATTACH THE
HOOK AND
LOOP STRIPS
POUCH
POUCH
BACKER