Bravetti PLATINUM PRO WC213H - Manual (Page 2)

IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
1
For Household Use Only
Rev. 07/05
12. Do not use adapter with an extension
cord. Plug adapter plug directly into an
electrical outlet. Use adapter only in a
standard (120V., 60Hz) electrical
outlet.
13. Unplug from outlet when not in use.
14. Keep adapter away from heated
surfaces.
15. Do not handle plug or appliance with
wet hands.
16. Never add water to the wine chiller.
17. Do not use this appliance outdoors.
18. Do not use this appliance for other than
intended use.
19. Always use the appliance on a dry, level
surface.
20. When operating the wine chiller, keep at
least 2 inches of free space on all sides
of the wine chiller to allow for adequate
air circulation.
21. Do not put any object into openings. Do
not use with any opening blocked; keep
free of dust, lint, hair and anything that
may reduce air flow.
22. Do not operate the unit dry.
23. Do not place your hands in the wine
chiller while the appliance is operating.
24. Do not attempt to use the adapter with
any other. Use only adapter supplied
with this appliance.
When using your Wine Bottle Chiller basic safety precautions should always be
observed, including the following:
1. Read all instructions before using your
Wine Bottle Chiller.
2. To protect against fire, electric shock
and injury to persons, do not immerse
cord, plugs, or Wine Chiller in water or
other liquid.
3. Close supervision is necessary when
any appliance is used by or near
children. This appliance is not for use
by children.
4. Do not let cord hang over edge of
table or counter, or touch hot surfaces.
5. To avoid electric shock, do not open
the housing. There are no serviceable
parts
6. Do not operate any appliance with a
damaged cord or plug or after the
appliance malfunctions or has been
dropped or damaged in any manner.
Return appliance to EURO-PRO
Operating LLC for examination, repair
or adjustment.
7. The use of accessory attachments not
recommended by the appliance
manufacturer may result in fire, electric
shock or injury to persons.
8. Do not place in a refrigerator.
9. Do not place on or near a hot gas or
electric burner or in a heated oven.
10. Insert the power cord into the electrical
wall outlet first and then insert the jack
into the unit.
11. To disconnect, first remove the jack
from the unit and then remove the plug
from the electrical wall outlet. Always
hold the plug, and never pull the cord.
Do not abuse the adapter cord. Never
carry the adapter by the cord or yank
to disconnect from an electrical outlet.
NOTE: *Illustrations may vary from actual product
Getting To Know Your Wine Bottle Chiller
1. Main Unit
2. Bottle Compartment
3. Power “On” Light
4. Air Intake
5. Air Vent
6. AC Power Inlet Socket
7. AC Jack
8. Adapter
9. Plug
Technical Specifications
Voltage: 120V., 60Hz.
Power: 1.2 Amps
OPERATING INSTRUCTIONS
Using your wine bottle chiller
1. Remove all packaging materials from unit.
2. Wipe clean with a damp cloth.
3. Insert the plug into an electrical wall outlet.
4. Insert the AC jack into the power inlet at the back of the unit. Make sure that the
jack is inserted with the channel side down.
5. The power “On” light (blue) will light up.
6. Place the unit on a flat surface. Do not place the unit on any cloth, paper or plastic
bag that might block the air intake on the bottom of the unit.
7. Insert the bottle of wine into the bottle compartment.
8. When wine has cooled, remove from the unit.
9. Remove the jack from the unit first and then the plug from the electrical outlet.
Cleaning and Maintenance
Before cleaning the wine bottle chiller, ensure that the adapter is unplugged from both
the appliance and the electrical outlet.
To clean, simply wipe the inside and the outside with a clean, damp cloth. Once clean,
dry thoroughly.
NOTE: Do not use outdoors. Household use only.
2