Ride on, Saddlebag harpoon accents – Kuryakyn 3260 SADDLEBAG HARPOON ACCENTS User Manual
Page 2
Advertising
PAGE
2
TEST FIT:
STEP 3
Position the Left Saddlebag Harpoon Accent as shown
in PIC 2. Use masking tape to make alignment
marks; remove the Accent.
INSTALL:
STEP 4
Use your fingernail to rub the adhesive backing; this will activate the adhesive. Remove and dis-
card the backing.
STEP 5
Using the marks made in
STEP 3
, align the Left Accent and press it into place for one minute;
full bonding will occur after 24 hours. Remove and discard the masking tape.
STEP 6
Repeat
STEPS 3 through 5
for the other side.
SADDLEBAG HARPOON ACCENTS
INSTALLATION
CLUTCH-SIDE (LEFT)
PIC 2
Ride On!
If operating the motorcycle before the 24 hour curing process has elapsed
then, secure the Accents with a high quality painter’s/masking tape.
Advertising