Kuryakyn 7611 KINETIC MINI BOARDS without ADAPTER - Manual (Page 3)

PAGE
3
ADJUST THE KINETIC MINI BOARD ANGLE:
STEP 6 Loosen (but do not remove) the 5/16” screw. PIC 3 Adjust the angle to the desired position. En-
sure that the splines are engaged and retighten the screw.
STEP 7 Fold the board up and ensure that it does not contact any part of the bike. Adjust if necessary.
KINETIC MINI BOARDS without ADAPTER INSTALLATION
Ride On!
ENSURE THAT THE INSTALLATION OF THESE BOARDS DOES NOT
INTERFERE WITH THE PROPER OPERATION OF THE MOTORCYCLE
BEFORE RIDING. INTERFERENCE WITH THE CONTROLS OR ANY
COMPONENT ON THE MOTORCYCLE MAY CAUSE LOSS OF CONTROL
RESULTING IN SERIOUS INJURY OR DEATH.
It is the end user’s responsibility to ensure that all of the fasteners
(including pre-assembled) are tightened before operation of the motorcy-
cle. Küryakyn will not provide warranty coverage on products or compo-
nents lost due to improper installation or lack of maintenance. Periodic in-
spection and maintenance are required on all fasteners.
PIC 3
5/16” SCREW AND
FLAT WASHER
VIEW OF UNDERSIDE OF BOARD