Kuryakyn 8805 FOOTPEG ADAPTER for VICTORY - Manual

CUSTOMER SERVICE
877.370.3604 (toll free)
INSTALLATION QUESTIONS
[email protected]
or call 715.247.2983
LIMITED WARRANTY
Küryakyn warrants that any Küryakyn products sold
hereunder, shall be free of defects in materials and
workmanship for a period of one (1) year from the
date of purchase by the consumer excepting the fol-
lowing provisions:
• Küryakyn shall have no obligation in the event
the customer is unable to provide a receipt showing
the date the customer purchased the product(s).
• The product must be properly installed,
maintained and operated under normal conditions.
• Küryakyn makes no warranty, expressed or
implied, with respect to any gold plated products.
• Küryakyn shall not be liable for any consequential
and incidental damages, including labor and
paint, resulting from failure of a Küryakyn product,
failure to deliver, delay in delivery, delivery in noncon-
forming condition, or for any breech of contract or
duty between Küryakyn and a customer.
• Küryakyn products are often intended for use
in specific applications. Küryakyn makes no
warranty if a Küryakyn product is used in
applications other than intended.
• Küryakyn electrical products are warranted for one
(1) year from the date of purchase by the consumer.
Components of Küryakyn products containing L.E.D.s
will be warranted for defects in materials and
workmanship for 3 years from the date of purchase.
• Küryakyn makes no warranty of any kind in regard
to other manufacturer’s products distributed by
Küryakyn. Küryakyn will pass on all warranties made
by the manufacturer and where possible, will expedite
the claim on behalf of the customer,
but ultimately, responsibility for disposition of the
warranty claim lies with the manufacturer.
ABOUT OUR CATALOG
You’ll find all our innovations for H-D, GL and
Metric Cruisers in our annual catalogs. Order online
today–select the ”CATALOGS” icon. Each Küryakyn™
product comes with a Proof-of-Purchase good for a
complimentary catalog. Details in packaging.
Be sure to ask your local dealer about other
Küryakyn products, the motorcycle parts and ac-
cessories designed for riders by riders.
©2005 Küryakyn USA ™ All Rights reserved.
I N S TA L L AT I O N
Part # Included
408805 2 Peg Adapter
208805 2 “D” Spring Washer
308805 1 Installation Instruction
Please read and understand entire instructions before starting installation.
thank you for choosIng küryakyn!
Please note
It is the installers’ responsibility to make sure all fasteners (including pre-assembled) are
tightened before operation of motorcycle. Küryakyn will not warranty components that are
lost due to improper installation. Periodic maintenance may be required.
tools suggested
Appropriate tool to remove stock footpeg.
Procedure
steP 1 Remove the OEM footpeg.
steP 2 Install the new footpeg using the stock hardware. Refer to FIG.1 when installing
the “D” spring washer and footpeg.
Ride On!
fIts: all hammer models, front and rear; all Vegas, 8-Ball, and JackPot
models, front and rear; all kIng PIn models, rear only. these adaPters
are not comPatIBle wIth floorBoards.
8805-13HD-0506
f o o t P e g a d a P t e r f o r V I c t o ry 8 8 0 5
fIg.1
fIg.1 key
a - footPeg
B - stock mountIng hardware
c - “d” sPrIng washer