Kuryakyn 8808 SPLINED ADAPTER mounts - Manual

CUSTOMER SERVICE
877.370.3604 (toll free)
INSTALLATION QUESTIONS
[email protected]
or call 715.247.2983
LIMITED WARRANTY
Küryakyn warrants that any Küryakyn products sold
hereunder, shall be free of defects in materials and
workmanship for a period of one (1) year from the
date of purchase by the consumer excepting the fol-
lowing provisions:
• Küryakyn shall have no obligation in the event
the customer is unable to provide a receipt showing
the date the customer purchased the product(s).
• The product must be properly installed,
maintained and operated under normal conditions.
• Küryakyn makes no warranty, expressed or
implied, with respect to any gold plated products.
• Küryakyn shall not be liable for any consequential
and incidental damages, including labor and
paint, resulting from failure of a Küryakyn product,
failure to deliver, delay in delivery, delivery in noncon-
forming condition, or for any breech of contract or
duty between Küryakyn and a customer.
• Küryakyn products are often intended for use
in specific applications. Küryakyn makes no
warranty if a Küryakyn product is used in
applications other than intended.
• Küryakyn electrical products are warranted for one
(1) year from the date of purchase by the consumer.
Components of Küryakyn products containing L.E.D.s
will be warranted for defects in materials and
workmanship for 3 years from the date of purchase.
• Küryakyn makes no warranty of any kind in regard
to other manufacturer’s products distributed by
Küryakyn. Küryakyn will pass on all warranties made
by the manufacturer and where possible, will expedite
the claim on behalf of the customer,
but ultimately, responsibility for disposition of the
warranty claim lies with the manufacturer.
ABOUT OUR CATALOG
You’ll find all our innovations for H-D, GL and
Metric Cruisers in our annual catalogs. Order online
today–select the ”CATALOGS” icon. Each Küryakyn®
product comes with a Proof-of-Purchase good for a
complimentary catalog. Details in packaging.
Be sure to ask your local dealer about other
Küryakyn products, the motorcycle parts and ac-
cessories designed for riders by riders.
©2005 Küryakyn USA ® All Rights reserved.
I N S TA L L AT I O N
Parts Included
2 Splined Adapter Mount
4 “D” Spring Washer
1 Installation Instructions
Please read and understand entire instructions before starting installation.
thank you for choosIng küryakyn!
In order to Protect you and others from PossIble Injury and/
or ProPerty damage or loss, Please Pay close attentIon to all
InstructIons, warnIngs, cautIons and attentIon notes regardIng
the use and care of thIs Product.
WARNING! THIS INDICATION ALERTS YOU TO THE FACT THAT IGNORING THE
CONTENTS DESCRIBED HEREIN CAN RESULT IN POTENTIAL DEATH OR
SERIOUS INJURY.
CAUTION! This indication alerts you to the fact that ignoring the contents described herein
can result in potential injury or material damage.
ATTENTION! This indication alerts you to the fact that ignoring the contents described herein
may negatively affect product performance and functionality.
tools suggested
Needle nose pliers
strIctly observe the followIng guIdelInes In order to use the
Product ProPerly and avoId PotentIally dangerous accIdents.
Procedure
steP 1 Park the motorcycle on a hard, level surface; turn off the ignition.
steP 2 Remove the hardware securing the footpeg to the footpeg mount. Set the
hardware aside for now, it will be re-used.
ATTENTION! Note the location and orientation of return springs (where applicable) before
disassembly.
steP 3 Remove the existing footpeg and spring where applicable; set the footpeg and
spring aside for now.
-cont.-
front aPPlIcatIons: honda: all ‘01-uP gl1800; suzukI: ‘01-uP boulevard
m50/volusIa 800 and ‘06-uP m109r.
note: not for use wIth Peg mounted floorboards on gl1800 or other
motorcycles wIthout adjustable shIfter PosItIon.
8808-11HD-0907
s P l I n e d a d a P t e r m o u n t s 8 8 0 8