Kuryakyn 8816 SPLINED ADAPTER for HONDA - Manual

CUSTOMER SERVICE
877.370.3604 (toll free)
INSTALLATION QUESTIONS
[email protected]
or call 715.247.2983
LIMITED WARRANTY
Küryakyn warrants that any Küryakyn products sold
hereunder, shall be free of defects in materials and
workmanship for a period of one (1) year from the
date of purchase by the consumer excepting the fol-
lowing provisions:
• Küryakyn shall have no obligation in the event
the customer is unable to provide a receipt showing
the date the customer purchased the product(s).
• The product must be properly installed,
maintained and operated under normal conditions.
• Küryakyn makes no warranty, expressed or
implied, with respect to any gold plated products.
• Küryakyn shall not be liable for any consequential
and incidental damages, including labor and
paint, resulting from failure of a Küryakyn product,
failure to deliver, delay in delivery, delivery in noncon-
forming condition, or for any breech of contract or
duty between Küryakyn and a customer.
• Küryakyn products are often intended for use
in specific applications. Küryakyn makes no
warranty if a Küryakyn product is used in
applications other than intended.
• Küryakyn electrical products are warranted for one
(1) year from the date of purchase by the consumer.
Components of Küryakyn products containing L.E.D.s
will be warranted for defects in materials and
workmanship for 3 years from the date of purchase.
• Küryakyn makes no warranty of any kind in regard
to other manufacturer’s products distributed by
Küryakyn. Küryakyn will pass on all warranties made
by the manufacturer and where possible, will expedite
the claim on behalf of the customer,
but ultimately, responsibility for disposition of the
warranty claim lies with the manufacturer.
ABOUT OUR CATALOG
You’ll find all our innovations for H-D, GL and
Metric Cruisers in our annual catalogs. Order online
today–select the ”CATALOGS” icon. Each Küryakyn™
product comes with a Proof-of-Purchase good for a
complimentary catalog. Details in packaging.
Be sure to ask your local dealer about other
Küryakyn products, the motorcycle parts and ac-
cessories designed for riders by riders.
©2005 Küryakyn USA ™ All Rights reserved.
I N S TA L L AT I O N
Part # Included
408816 2 Splined Adapters
6 “D” Spring Washer
4 1/4-20 x 3/8 Set Screws
308816 1 Installation Instructions
Please read and understand entire instructions before starting installation.
thank you for choosIng küryakyn!
Please note
It is the installers’ responsibility to make sure all fasteners (including pre-assembled) are
tightened before operation of motorcycle. Küryakyn will not warranty components that are
lost due to improper installation. Periodic maintenance may be required.
tools suggested
Allen wrenches, combination wrenches.
Procedure
steP 1 Remove the stock footpeg. Save the fastener.
steP 2 If not already installed, install two set
screws into the back of the splined adapter. Install the
set screws backwards, with the Allen heads inside the
adapter body. See PIC.1.
steP 3 Install the splined adapter into the mount.
Use the “D” spring washers as needed to fill any excess
space between the adapter and the mount. Secure the
splined adapter with the stock fastener. See PIC.2.
steP 4 The set screws adjust the angle of the foot
peg and prevent the splined adapter from pivoting
too far upward. To find the correct angle, place the
foot peg on the adapter and visually determine if
you would like a steeper or flatter angle. Adjust the
depth of the set screws to suit your preference. You
can access the Allen head of the set screws via the
clearance holes in the front of the splined adapter.
steP 5 Install your
new Küryakyn footpeg or
floorboard. Repeat STEP 1
through STEP 5 for the opposite
side.
Ride On!
fIts the front footPeg mounts of ’02-uP honda VtX 1800c/f.
8816-11MC-0406
s P l I n e d a d a P t e r f o r h o n d a 8 816
PIc.1
PIc.2
Install the “d” sPrIng
Washers as needed
Install the stock
fastener