KV2 Audio ESP2000 - Manual (Page 10)

ESP2000
Specifications
Page | 10
System Acoustic Perfomance
-1dB Response 3Hz ÷ 40kHz
Channel Crosstalk >70dB
Signal to Noise Ratio >115dB
Total Harmonic Distortion <0.005% (1W) / <0.01% (clip -1dB)
Output Channels
Amplifier Type High Efficiency, Emitter coupled
Number of Channels 2
Total Output Power 2000W
Max. Output Voltage 78V (peak)
Max. Output Current 48A (peak)
Minimum load impedance per channel 2Ω
Out. Power 16Ω - 1 channel / 2 channels loaded 175W / 160W (RMS)
Out. Power 8Ω - 1 channel / 2 channels loaded 340W / 300W (RMS)
Out. Power 4Ω - 1 channel / 2 channels loaded 600W / 500W (RMS)
Out. Power 2Ω - 1 channel / 2 channels loaded 1000W / 800W (RMS)
Out. Power 16Ω - bridged 600W (RMS)
Out. Power 8Ω - bridged 1000W (RMS)
Out. Power 4Ω - bridged 1500W (RMS)
Signal Input
Input Channels XLR
Input Sensitivity 1.55V
Input Impedance 20kΩ (balanced)
Signal Output XLR Through
Speaker Output
Speaker Output Neutrik Speakon®, 2x Binding posts
Features
Level Control -∞ ÷ 0dB
Subwoofer Level Control +6dB @ 60Hz
RMS Limiter On / Off
Indicators Power ON/Thermal, Signal/Limiter
Power
Power Connector Neutrik PowerCon®
Operating Voltage 115V / 230V / 250V, (50 / 60Hz)
Recommended Amperage 10A 115V | 6A 230V | 6A 250V
Soft Start YES
Protection Thermal breaker
Cooling 2x temperature controlled fans
Physical Dimensions
Height 88mm (3.5"), 2RU
Width 483mm (19.00")
Depth 496,4mm (19.54")
Weight 16kg