KV2 Audio SL2.15 - Manual (Page 17)

The three-way, mid / high loudspea-
ker system shall incorporate four
12-inch mid-bass (MB) transducer a
8-inch mid range (MR) speaker and
a 1.4-inch exit compression driver
high frequency (HF) transducer. The
LF drivers are direct radiating, tuned
for optimum mid-bass response.
The HF and MR transducers shall be
loaded in constant directivity
mid/high horn assembly.
The system has a nominal coverage
pattern of 110° (horizontal) x 40°
(vertical). The loudspeaker enclosure shall
have a slim shape and shall incorpo-
rate, two side handles with integra-
ted M10 suspension points, integra-
ted internal braces with total 18
M10 suspension points.
The speaker cabinet shall be
finished with an ultra wear resistant
black polymer coating and fitted
with a weather resistant perforated
steel grill.
The system shall receive power
from a separate stereo Amplifer
SL3000. Amplifier and controller module
SL3000 consisting of separate
power amplifiers for high, midran-
ge and midbass transducers as
well as signal processing including
electronic band pass crossovers,
limiters, phase alignment, time
correction, equalization and
speaker protection.
The speaker system shall connect
to the SL3000 via proprietary
cables terminated in Amphenol
AP-6 connectors. The three-way
mid / high loudspeaker system
shall be the KV2 Audio SL412.
SL412 Architects and Engineer’s
Specifications
Drawing
SL412
Drawing
17