Ac power requirements – KV2 Audio EX1.8 User Manual

Page 6

Advertising
background image

EX1.8 USER’S GUIDE

P. 6

IMPORTANT SAFETY INSRUCTIONS

1. Read all product instructions.

2. Keep printed instructions, do not throw away.

3. Respect and review all warnings.

4. Follow all instructions.

5. Do not use this loudspeaker near water, in unpro-
tected out door areas or in rain or wet conditions.

6. Clean only with dry cloth.

7. Do not block any ventilation openings.

8. Install in accordance with KV2 Audio recom-
mended installation instructions.

9. Do not install near any heat sources such as heat
radiators, heat registers, stoves, or other apparatus
that produce heat.

10. Do not defeat the safety purpose of the ground-
ing type plug. A grounding type plug has two blades
and a third grounding connector. The third connector
is provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.

11. Protect the power cord from being walked on or
pinched, particularly at plugs, convenience recep-
tacles, and the point where they exit from the loud-
speaker. The AC mains plug or appliance coupler
shall remain readily accessible for operation.

12. Only use accessories specif ed by KV2 Audio.

13. Install the product only with rigging specified by
KV2 Audio, or sold with the loudspeaker.

14. Unplug this loudspeaker during lightning storms
or when unused for long periods of time.

15. Refer all servicing to qualifed service personnel.
Servicing is required when the loudspeaker has been
damaged in any way, such as when the power-supply
cord or plug has been damaged; liquid has been
spilled or objects have fallen into the loudspeaker;
rain or moisture has entered the loudspeaker; the
loudspeaker has been dropped; or when for undeter-
mined reasons the loudspeaker does not operate
normally.

SAFETY SUMMARY

To reduce the risk of electric shock, disconnect the
loudspeaker from the AC mains before installing audio
cable. Reconnect the power cord only after making all
signal connections. Connect the loudspeaker to a
twopole, three-wire grounding mains receptacle. The
receptacle must be connected to a fuse or circuit
breaker. Connection to any other type of receptacle
poses a shock hazard and may violate local electrical
codes. Do not allow water or any foreign object to get
inside the loudspeaker. Do not put objects containing
liquid on or near the unit. To reduce the risk of over-
heating the loudspeaker, avoid exposing it to direct
sunlight. Do not install the unit near heat-emitting
appliances, such as a room heater or stove. This
loudspeaker contains potentially hazardous voltages.
Do not attempt to disassemble the unit. The unit
contains no user serviceable parts, repairs should be
performed only by factory trained service personnel.

CAUTION: Rigging should only be done by
experienced professionals.

AC POWER REQUIREMENTS

Advertising