KV2 Audio SDD3 - Manual (Page 15)

Memory
New memory
SDD3 is equipped with a dynamic memory list with
up to 30 memory positions. New memory can be
created when pressing ENTER at New in the memory
list.
When a new memory is created, it is marked with a
position number from 1 to 30 whilst the memory
function select is switched to the rename position.
Rename memory
Memory name can contain up to 8 letters, space or
numbers. To rename a memory select the memory
position to rename and select rename at the
memory function list, press ENTER.
When renaming, the renaming letter flashes, select
the required letter by rotating the encoder. Switch
between A - Z, a - z , spacebar 1 - 9 using
CHAN/NEXT button.
To jump to the next letter position, press ENTER.
To exit renaming press FUNC/EXIT button.
When new memory is created the actual setup is
automatically saved.
Save to memory
All delays, units, delay mode, and cardioid setup are
saved into the memory.
To save to memory, select the memory position to
save in and select save from the memory function
list, press ENTER. When saved, the memory
number, is shown in the top right corner.
Memory recall
To recall from memory, select the memory position
to recall and select recall at the memory function
list, press ENTER.
When recalled, the memory number, is shown in
the top right corner.
Delete memory
To delete a memory, select the memory position to
delete and select delete in the memory function list,
press ENTER.
LEVEL
1 Hall
Memory:
New
DELAY MENU
Memory : New memory
( ) rename
LEVEL
1 Hall
Memory:
New
DELAY MENU
M1
Recalled or saved memory is displayed
in right top corner
( ) recall
LEVEL
Units mode
Subwoofer mode
DELAY
Memory
MENU
MENU screen - Memory
Page | 15
Lock
Display
Temperature
SDD3 Setup