L.A. Baby Modular Window Crib CW-755-HW - Manual (Page 3)

Step 1: Lay Upper Window Crib face down on a padded surface.
Attach frame (A) side and two spacer blocks (B) to crib using bolts
D) and washers (F). Note threaded inserts on crib to receive the
bolts. Step 2: Repeat step 1 for the remaining side rail Step 3: Attach the back stabilizer bar ( C) using four
bolts (E) , washers (F) and barrel nuts (G). Step 4: Tilt frame with crib upright. Step 5: Roll lower crib into lower bay Inspect frame and cribs
NEVER use this product if there are any loose or
missing fasteners, loose joints, or broken parts. Check
before assembly and periodically during use.
Modular Window Crib System
Parts Units
A. Side Frames 2
B. Spacer Blocks 4
C. Stabilizer Bar 1
D. Long Bolts 8
E. Short Bolts 4
F. Washers 12
G. Barrel Nuts 4
H. Hex Wrench 1
A
C
E F G D
F & D
F & D
D & F
E & F
G
F & E
D & F
B
B
B
B
B
B
B
B A A
A
Upper Window Crib
H
L.A. Baby Juvenile
Products
16039 Loukelton Street
City of Industry, California 91744
Toll free customer service: 800-584-3094
e-mail: [email protected]