Landoll 3K063_XXL Wing to Center Frame Installation - Manual

Grease Fitting
Capscrew
3/8-16 X 2 1/2”
Locknut
Spacer
1” x 5 7/16” Hinge Pin
3/8” x 3” Roll Pin
1” x 4 5/8” Pin
1” Flat Washers
Roll Pin
3/16” x 2”
Machinery
Bushings
Machinery
Bushings
Wing to Center Frame Installation
Figure 10
Grease
Fitting
Capscrew
1/2-13 x 3 1/2”
Washer
Spacer
1 1/4” x 7 3/16”
Pin
Long
Link Hinge
Pin
Machinery
Bushings
Roll Pin
½” x 3”
Roll Pin
5/16” x 2”
Pin
1” x 5 1/2”
1” Flat
Washer
XL and XXL Models 3K063
X Model
This revision provides for a stronger, more positive assembly. The pins in the rear hinges used in the
wing to frame assembly have been replaced with bolts and locknuts. See the drawing below to
determine your models set-up.
3/8-16
Pin
1 1/4” Flat
Machinery
Bushing
1/2-13
Locknut