Landoll MCL/MCC/MCLS/MLCS/MCCS 1483, 1643, 1803 RIGID PULVI-MULCHER - Manual (Page 20)

2-10 1K044
ASSEMBLY
Bracket Assembly
Assemble the 8 Tooth Tube Brackets to the 8 vertical
tube supports, one bracket to each support. For the 15’
machine only, there are two heavy-duty brackets
provided for the inner rear tube supports that support
the rear spring tooth tube. Use 1/2-13” X 6” Bolts and
1/2-13” Lock Nuts. If your machine is equipped with
5J609 S-Tines, mount these brackets to the top and
middle holes. See Figure 2-10.
If your machine is equipped with 9D662 C-Teeth, mount
the brackets to the middle and the bottom holes.
See Figure 2-10.
Figure 2-11 shows the proper positioning of these
brackets when assembled. The brackets must be
assembled exactly as shown in the illustration.
(Reversing some of these brackets will cause
interference later when mounting spring teeth).
Figure 2-10: Tube Bracket Assembly
2 used on 1803
Machines Only
see Bracket Locations
C-Tooth Machines
Use Middle and
Bottom Holes
Tooth Tube Bracket
3K074
Tooth Tube Bracket
9J090
Nut,Lock 1/2-13
HHCS,1/2-13 X 6
HHCS,1/2-13 X 6-1/2
S-Tine Machines
Use Top and
Middle Holes
Tooth Tube Bracket
3K073
Tooth Tube Bracket
9J091
Nut,Lock 1/2-13
HHCS,1/2-13 X 6
HHCS,1/2-13 X 6-1/2
2 used on 1803
Machines Only
see Bracket Locations