Siemens Euroset 5020 - Manual (Page 2)

euroset 5020 / IM eng-fra-russ-kro / A30350-M209-A801-2-UP19 / 5020.fm / 24.07.2006
2
GB
All electrical and electronic products should be dis-
posed of separately from the municipal waste stream
via designated collection facilities appointed by the
government or the local authorities.
This crossed-out wheeled bin symbol on the product means
the product is covered by the European Directive 2002/96/
EC.
The correct disposal and separate collection of your old
appliance will help prevent potential negative conse-
quences for the environment and human health. It is a pre-
condition for reuse and recycling of used electrical and elec-
tronic equipment.
For more detailed information about disposal of your old
appliance, please contact your city office, waste disposal
service or the shop where you purchased the product.
Preparing the telephone for use
Recommended installation of telephone
◆ Do not expose the telephone to direct sunlight or other
sources of heat.
◆ Operate at temperatures between +5°C and +40°C.
◆ Maintain a distance of at least one metre between the
telephone and radio equipment, e.g. wireless
telephones, wireless pagers or TV sets. Otherwise,
telephone communication could be impaired.
◆ Do not install the telephone in dusty areas as this can
shorten the service life of the telephone.
◆ To clean, wipe with a moist or antistatic cloth only, never
with a dry cloth (risk of electrostatic charging and
discharge) or harsh cleaning agent.
◆ Furniture lacquer and polish can be damaged by contact
with parts of the unit (e.g. device feet).
Connecting
Insert the short end of the coiled handset cord in the socket
provided in the handset and the long end in the socket
marked with an a on the underside of the device. Plug the
phone cord into the outlet on the wall and the other end
into the socket marked with a Y on the underside of the
device. Then your telephone is ready to use.
Setting the internal clock
?3 Initiate function.
The current set time is displayed in 24-hour
mode (default setting: 00:00).
o Enter the correct time in hours <hh> and
minutes <mm> (24-hour mode).
? Press the Set key.
Making calls
Dialling a number
co Lift handset, dial number.
or ...
o Bc Dial number (you can delete wrongly entered
digits with A and then enter the correct
digit) and press the OK key.
After 2 seconds the number is dialled.
Lift the handset if you want to talk via the
handset.
Any digits after the 20th digit are moved from right to left in
the display. The Last number redial key ; can be used to
insert pauses when dialling, starting from the 2nd digit.
Select phone number from the calls list (if available):
see 6.