Caution – Landoll 876 Series Wing Tilloll User Manual
Page 35
ASSEMBLY INSTRUCTIONS
3-19
3.
Once center and outer reel assemblies are attached
to the frame, adjust as necessary to center on frame
and to prevent binding.
IMPORTANT
Distance between reel blade and shank should be 1
inch.
4.
Reel bearings lock collars should be installed as
described below:
a.
Mate cam of collar with cam on the inner race of
the bearing.
b.
Pressing collar lightly against inner ring, turn the
collar in the same direction of the reel rotation.
You will feel the collar tighten at this point.
c.
With a punch and hammer, strike the collar four
times. This will tighten the collar as tight as
necessary.
d.
Lock the collar with the set screw.
CAUTION
5.
Once all adjustments have been made, tighten all
hardware.
When working with the reels use care because
they rotate freely and can catch an arm, hand, or
foot and can cause severe injury.