Leica Biosystems CW4000 Quick Start Guide - Manual (Page 8)

Page 4 Leica CW4000 Quick Start Guide
Welcome
Welcome to your new Leica CW4000 Cytogenetics Image Analysis
Workstation.
We at Leica Microsystems are sure that you will be pleased with
your new system. We hope that you find the software both intuitive
and easy to use. To help with this we have re-organised our user
manual.
This guide, along with the tutorials, outlines the standard tools you
will need to carry out the routine, everyday tasks. In addition, we
have included some helpful tips and hints to help you get the most
out of your workstation.
However, we are sure that there will be some things that you would
like to do that are not covered by this manual. If so, please let us
know your requirements and, if it is possible, we will certainly point
you in the right direction. If your request is not currently covered by
the software functionality, letting us know will help us determine
future product development.
If there is any aspect of the system that you are concerned with,
please do not hesitate to let your local specialist know. Alternatively,
you can e-mail us on [email protected] and
we will do our very best to help you.
We are always keen to hear about the successes you have had using
our system. If you have any publications in which you have used a
Leica Imaging System we would love to hear about them.
Don’t forget that Leica CW4000 allows you to capture standard
banded images and analyse G-, R-, and Q- banded cells, along with
CGH and MFISH images; and FISH is the software used for the
capture of all your fluorescence labelled cytogenetic slides, whether
they be metaphase or interphase.