Lenze CS9800 Mounting Instructions - Manual (Page 32)

Installation
Mounting steps
Fixing the mounting frame to the support arm
4
l
32 MA_CSx8xx DE/EN/FR/ES/IT 2.0
With add−on component

1 0
‚
1 3
ƒ
„
6
4
5
2
1
4
0
4
CS57x0−006
How to proceed:
1. Check support arm system for professional mounting and sufficient
carrying capacity.
– See support arm documentation.
2. Stick the self−adhesive seal 0 on the adapter plate 1 on the side with the
threaded bolts.
3. Pull the connecting cables 2 out of the support arm 3 and screw the
adapter plate 1 to the support arm 3.
– For screws see support arm documentation.
4. Screw the add−on component 4 to the threaded bolts of the adapter plate
1.
– 4 spacer bolts 5 on the inside/outside M5 x 20 mm
5. Stick the second self−adhesive seal 0 on the add−on component 4.
6. Screw the mounting frame 6 to the add−on component 4.
– 4 nuts M5 with washers Æ 5.3 mm
– 4 screws M5 x 8 mm with washers Æ 5.3 mm
Now you can connect the Command Station ( ¶ 35).