BT 4016 Classic - Manual (Page 43)

To adjust the message length
You can specify the time limit
your callers have to leave a
message. The choices are 30
seconds, 60 seconds, 120
seconds (this is the factory
setting) or Maximum
(remaining record time).
Press the MENU options
button.
Press the DOWN button until
the display shows
VOICE MAIL .
Press the OK options button.
Press the DOWN button until
the display shows
MESSAGE SET .
Press the OK options button.
The display shows MSG LENGTH .
Press the OK options button.
Press the UP or DOWN button
to display,
MAXIMUM 30 , 60 or
120 .
Press the OK options button
to confirm.
The display will show SAVED
and you will hear a confirmation
tone.
Press the RED PHONE button
until you reach the idle screen.
MENU
OK
OK
OK
OK
The display will show SAVED
and you will hear a confirmation
tone.
Press the RED PHONE button
until you reach the idle screen.
Diverse 4016 Classic ~ Issue 2 ~ 6th Edition ~ 1st March ’02 ~ 4416
41
To set the number of rings
You can set how many times
the answering machine will ring
before it takes the call. You
can choose between 2-9 rings
or time saver.
Time saver is the factory
setting, this can save you the
cost of a call when you want to
ring in to find out if you have
new messages.
•If your answering machine
answers after 3 rings, you have
new messages.
•If it answers after 5 rings, you
do not have new messages.
So if you hear more than 3 rings,
you can end the call without the
cost of being connected.
Press the MENU options button.
Press the DOWN button until
the display shows
VOICE MAIL .
Press the OK options button.
Press the DOWN button until
the display shows
RING DELAY .
Press the OK options button.
Press the UP or DOWN button
to display the setting you want.
Press the OK options button to
confirm.
Additional answering
machine settings
MENU
OK
OK
ANS
WER
MA
CHINE
OK