Lenze EZZ0013 - Manual (Page 4)

General information
EDKZZ0013 DE/EN/FR 3.1
4

H1_Allgemeines-Ferritkern_en
1 General Information
These Instructions
describe the use of ferrit cores EZZ0013 as part of the wiring of 8200 vector frequency
inverters according to EMC requirements.
Use
the ferrit core if the motor and the 8200 are to be connected using a multi-core cable with
common shield:
Motor 8200 vector
PTC or thermal contact ↔ Connection terminal X2.2 (T1/T2)
U, V, W, PE ↔ Connection terminal X2.1 (U, V, W, PE)
Mounting
Both cores of the motor PTC and thermal contact must be routed through the ferrit core
“EZZ0013” in direct vicinity to the terminal X2.2.