Lenze ASY Starter Lenze OPC UA-Server - Manual (Page 5)

Lenze · EASY Starter | OPC UA-Server · 1.0 EN - 04/2014
5
Access to Lenze devices with OPC UA
»EASY Starter«: Using OPC UA
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
3 Access to Lenze devices with OPC UA
3.1 »EASY Starter«: Using OPC UA

How to proceed:
1. Start the »EASY Starter« in the parameterisation mode.
2. Add the required devices to the »EASY Starter« (area

),
3. Save the configuration by clicking the button (area

).
• The »EASY Starter« writes a configuration file, then the access to the Lenze devices is
prepared.

Note!
In order to access Lenze devices with OPC UA you need a valid licence in the "EASY
Advanced" version“ which is, for instance, included when buying the Lenze »Engineer«.
The access to Lenze devices must first be prepared in the »EASY
Starter«. The button to prepare the access via OPC UA can only be
activated if...
...a licence of the "EASY Advanced" version or higher is available.
...at least one devices is integrated.
...the »EASY Starter« has been started in the parameterisation mode.
 Lenze devices which are to be accessed via OPC UA.
 Save the configuration file in order to prepare the access via OPC UA