Lenze Function library LenzeConversionBox - Manual (Page 6)

Function library "LenzeConversionBox"
System requirements
6
L
DMS 1.0 EN - 07/2011 - TD05
2 System requirements
Software
The function library can be used with the following Lenze software:
Supported target systems
Product Type designation Version
Drive PLC Developer Studio ESP-DDS2-x 2.x
PLC Designer V2 2.2 or higher
Product range Type designation Hardware version From software version
Drive PLC EPL-10200 1A or higher 2.x
9300 Servo PLC EVS93xx-EI
EVS93xx-ET
2M or higher 2.x
ECS ECSxA 1B or higher 7.x
9400 ServoPLC E94AxPExxxx 2A or higher 2.x