Lenze Global Drive Control (GDC) - Manual (Page 10)

Global Drive Control | Industrial PC as Gateway
IPC as gateway
Connect to drive
10 1.0 EN - 03/2008
L
Nur für internen Gebrauch!
4.2.2 Online mode via IPC gateway function
r After the parameters have been read in successfully, the drive is in online mode. The
drive parameters are available in the »GDC«:
In a separate window, the »GDC« provides an overview of the selected drives at the system
bus:
Note!
The »GDC« displays the selected drive in the Drives connected to bus dialog
window via the gateway function.. More drives can be connected to the system
bus which are not visible in the overview of the dialog window.