Let's Go Aero V4 Four-Bike Carrier VME-V4 - Manual (Page 4)

V4™ Bike Rack
For Customer Service, contact Let’s Go Aero:
2120 Naegele Road, Colorado Springs, CO 80904
Phone: 877-464-2376 or 719-630-3800
Email: [email protected].
Learn about our line of trailers, hitch carriers. and other cargo management
solutions at www.LetsGoAero.com
ONE-YEAR LIMITED WARRANTY
We warrant all LGA brand rack systems and its accessories manufactured by LGA during the time that an original retail
purchaser owns the product. This warranty terminates if a purchaser transfers the product to any other person.
Let’s Go Aero warrants this product to be free from defect in material and workmanship for one year (retain your sales receipt
for your records). Any product or part thereof found to be defective within that period will be replaced without charge provided
that: (1) the product was not misused; (2) no alterations or modifications were made; (3) its failure was not a result of normal
wear expected in the use of the product; (4) the product or part is delivered, freight prepaid, to Let’s Go Aero.
Manufacturers only obligation shall be to replace such products or parts proved to be defective. A Return Merchandise
Authorization is required prior to return. Please contact Let’s Go Aero toll-free, at 877-464-2376 or 719-630-3800, or via email
to [email protected] to get an RMA number.
No warranty is given for LGA products purchased outside of the United States and Canada.
V4 BIKE CARRIER GUIDELINES
The V4 Teleporter bicycle carrier’s maximum load weight is 180 lbs. Do not exceed this carrying capacity.
NEVER drive your vehicle with the Teleporter in the Telescoped position. Always secure rack using the Silent Hitch Pin® with
Handle before transit.
Always make sure the Safety Cable is attached and the Silent Hitch Pins® are securely engaged before transit. A wrench
MUST be used to tighten the HexHead Silent Hitch Pin® at the hitch receiver. Tighten the Silent Hitch Pin to 30 ft. lbs- 60 ft.
lbs of torque (equivalent to tightening a lug nut on a car wheel).
The Safety Cable should always be attached when using the V4 Teleporter in order to prevent the V4 from sliding off the Tilt
Tube when telescoping the V4 Teleporter and to prevent the Safety Cable from dragging on the ground while in transit.
Do not use this rack and accessories for purposes other than those for which they were designed. Failure to follow the
guidelines of the product’s instructions will void the warranty.
Keep bicycle tires away from vehicle’s hot exhaust flow by at least 6 inches.
Before Transit:
Attempt to shake the carrier to verify the carriage bolts, Tilt Pin, Silent Hitch Pin® with Handle and Silent
Hitch Pin® are tight.
Verify that the safety pins are indeed locking the Wings to the Base Pockets.
Verify the Toggles are securing your bicycles wheels and frame to the carrier as explained earlier.
U.S. Patent No : D684917; 6,409,203; 6,609,725; 6,945,550; 8,079,613; patents pending