Lightforce LiFePO4 Batteries User Manual

Lightforce Hardware

Advertising
background image

The Lightforce Lithium Iron Phosphate Portable Power Pack comprises of a 7.5 amp hr zero

maintenance (sealed battery pack) including dedicated mains charger fitted with a cigarette socket for

convenient direct connection to Lightforce lighting systems.

The battery requires no fluid adjustments and will not leak if carried in any orientation.

This 12 volt battery can be used as a replacement battery for the standard SLA 7 – 9 amp hr as the

external dimensions are the same.

Built within this battery is an onboard battery monitoring system that monitors the individual cells then

calculates total remaining capacity via the onboard LED display.

Charging the Battery:

The 7.5 amp hr battery is transported with the terminals insulated. Before connecting to the Lightforce

battery bag, remove the insulation from the terminals and discard.

To fully recharge the battery pack, connect the specialised universal mains power supply directly into

the female cigarette socket located on the bag. The battery is supplied with a float charge and will

require initial charging before use.

The AC mains chargers LED indicator will illuminate red indicating the charging process has

commenced, the battery pack is fully charged once the LED indicator turns solid green.

Disconnect the charger from the battery pack and the AC mains outlet once the charging process is

completed.

DO NOT leave the charger connected to the battery pack for extended periods, once the battery has

been charged.

Battery Protection:

Over charge protected

Over discharge protected

Over current protected 30 amps

Short circuit protection

Internal thermostat protection +65°C +/- 5°C

Battery voltage cut off 9.2 ~10 volts

Replaceable 30 amp mini blade automotive fuse

Precautions:

DO NOT disassemble the battery pack

DO NOT short circuit battery pack for extended periods

For optimal long term performance the battery pack should be recharged immediately after use

and stored in the UP-RIGHT position in a cool dry location

USE ONLY LiFePO4 (Lithium Iron Phosphate) battery chargers

LiFePO4 INSTRUCTIONS

LIGHTFORCE AUSTRALIA PTY LTD • 28 Orsmond Street, Hindmarsh SA 5007 Australia • www.lightforce.com | email: [email protected]

Australia: Tel: 08 8440 0888 | Fax: 08 8346 0504 • Int’l: Tel: +618 8440 0888 | Fax: +618 8346 0504

All logos and images are subject to relevant trademark and copyright protection LIGHTFORCE Pty Ltd | © Jan 2012 • Data and specifications contained maybe subject to change without notice.

LIGHTFORCE AUSTRALIA Pty. Ltd., shall be not be liable for damage, malfunction, failure resulting from accident, misuse, misapplication, unauthorised repair, neglect, modification, unauthorised or non standard replacement parts, accessories,

globes, batteries or voltage or the operation of the Product beyond its technical and environmental specifications.

INSTRUCTION DATA

PRODUCT: LiFePO4 Batteries

VER: 1.1

DATE: JUL 2013

Advertising