Loadstar Sensors SC-1200 - Manual (Page 2)

SC-1200 Quick Start Guide
© 2011 Loadstar Sensors Inc 2
•
If you have a Zigbee dongle, then your SC-1200 is wireless enabled.
Physical connection to the computer is not required. Simply connect the
Zigbee dongle to any of the computer’s USB ports.
•
If you do not have a Zigbee dongle, then you need to connect the SC-1200
directly to the computer. Connect SC1200-Master’s Uplink-Z port to the
“RS422-to-USB” adapter (see below). Then plug the USB to an available
port on your computer. The Windows OS will automatically assign a
COM port. Note: The blue cable is a standard Ethernet CAT5E cable. If
longer length is required, you may substitute this cable with a longer
Ethernet CAT5E cable for up to 100m.