Love The Drive BMW Windstop 3 series (E46) 323, 325, 330, M3 2000 to 2006 - Manual (Page 4)

Next extend the barrel bolt out on the
passegenger side and lock it in place
with the handle facing up. Do not extend
the bolt on the drivers side yet.
Then extend both of
the rear brackets
and tighten the
thumb screws
finger tight.
Start by sliding the plastic barrel bolt into the
up position on both sides. The up position is
when all of the thumb screws are below the
bolt. Your wind deflector will arrive with the
barrell bolts in the up position.
Tighten the thumb screws so they are finger
tight.
The lower position is for storing your wind
deflector in your trunk.
Standing on the drivers side of your BMW, insert the
barrel bolt into the hole on the passengers side.
We have our video install guides on
our website and on youtube.com also
feel free to call or email us if you
have any questions 1-855-457-5683
[email protected]