Love The Drive Chrysler 200 Convertible Wind Deflector 2011 to 2014 - Manual (Page 3)

Next lower the wind deflector into the back seat
area. Keeping the wind deflector in an upright
position as shown below.
Slide the plastic locking bolt into the hole in
the trim panel on the opposite side from
where you are standing.
Now on your side lower the wind deflector so it
lines up with the hole in the trim panel. Slide the
locking bolt into the hole and turn the handle
downwards to lock it into place.
Start by sliding the barrel bolt into the up
position. The up position is when all of the
thumb screws are below the bolt. Your wind
deflector will arrive with the barrell bolts in
the up position.
Tighten the thumb screws so they are finger
tight.
The lower position is for storing your wind
deflector in your trunk.
Next extend the barrel bolt out on the
passegenger side and lock it in place. Do
not extend the bolt on the drivers side yet.