Love The Drive Lexus IS 250 or 350 Wind Deflector 2009 to 2015 User Manual
Page 4
When the the
inserts are
installed
correctly they
will look like
this and the
"B" sticker
can be
removed.
Most cars will not have this piece but some cars
may have a small plastic piece in the rear head
rests that needs to removed for the rear brackets
to be easier install. This can just be pushed out
from the back of the head rest.
Under the cover you will see
this hole. We have sent you
four inserts, two black and two
beige. Depending on the colour
of your cars interior, install the
matching inserts.
Passenger side "B" is right
side up, facing back.
Driver side "B" upside
down, facing back.
There is a letter "B" on each insert. The letter "B" will point
towards the back seat. On the passenger side B will be right
side up. On the driver side the "B" will be upside down. But will
still be towards the back seat. Tap these in with the palm of
your hand or lightly with a hammer. So they are flush to the
rear trim panel. You only have to do this once.
If you have any questions or comments please
call 1-855-457-5683 or email [email protected]
www.lovethedrive.com