Lowell AMFM1 - Manual

Optional Accessories (sold separately):
Lowell Manufacturing offers a full line of 19" equipment cabinets, wall mount shelves, rack mount AC power panels,
AC power strips, and cooling fans that can be used to install the Lowell Amplifier products.
See www.lowellmfg.com for product details.
1
REMOVABLE
PHOENI X
CONNECTOR
Instruction Sheet
IS-AMFM1
Issued: 5-19-14
Lowell Manufacturing Company 100 Integram Drive Pacific, Missouri 63069 U.S.A.
Call: 800-325-9660 Fax: 636-257-6606 Click: www.lowellmfg.com
AMFM1
INSTALLATION SHEET
AND OPERATORS MANUAL
AMFM1 General Description:
The AMFM1 is a rack-mountable digital AM/FM tuner featuring a large illuminated digital display with 10 AM and 10
FM station presets, 14 day preset memory retention, and auto station search. This tuner features dual mono Hi-Z
unbalanced line level outputs, and an independent mono 8 ohm amplifier which will drive a monitor speaker or a
telephone system’s “Music-on Hold”. A 12 VDC power connection is available for emergency back-up power or for
DC powered use in remote locations.
An FM wire antenna is included and an “F” connector adapter is included for
the connection of coaxial cable from a remote FM antenna (coaxial cable and remote FM antenna not included). A
local AM loop antenna, a 2' RCA stereo to RCA stereo cable, and four (4) rubber stick-on feet are also provided.
1
Technical Specifications
Dimensions: 19" wide x 1.75" high x 9.5"deep (482mm wide x 44mm high x 240mm deep)
Shipping Weight: 10LBS. (4.54KGS)
Color: Black
Tuning Range: FM: 87.5-108MHz, AM: 530-1710kHz,
Total Harmonic Distortion: < 1% at 1kHz at rated power
Weight: 7.25LBS. (3.29KGS)
AC Supply Voltage: 115VAC/230VAC (switchable) 50/60Hz, Power Consumption: 10W @ Rated Power
DC Supply Voltage: 12VDC, Power Consumption: 1.5A @ Rated Power
Antenna Input: FM: 75
W unbalanced coaxial, AM: 150W twin push terminals for AM loop antenna.
Outputs: Dual mono RCA jacks, unbalanced 0.775V @ 330
W, Music-On-Hold Output: 8W 1W @ screw terminals
Frequency Response: 50Hz-15kHz + 3dB
Signal to Noise Ratio: FM: 60dB, AM: 45dB