Bogen CSD2X2L - Manual

CEILING GRID CEILING GRID
SUPPORT RAIL
CROSSBAR INCLUDED
(2 ft. X 4 ft. CEILING GRID ONLY)
CEILING TILE
(CUT IN HALF, OR NO MORE
THAN 23-3/4")
2 ft. X 2 ft.
TILE SPACE
2 ft. X 4 ft.
TILE SPACE
Low-Impedance Drop-In
Ceiling Speaker with Back Can
CSD2X2L ( U )
Bogen’s CSD2X2L(U) Drop-In Ceiling Speakers are 8-ohm,
full-range speakers that allow for fast and easy installa-
tion, which saves installation time, effort, and cost.
The CSD2X2L(U) is a 2' x 2' speaker that fits perfectly
into place in 2' x 2' ceiling grids – without needing to
cut ceiling tiles or requiring the use of tile support rails.
The CSD2X2L(U) can also be easily installed in 2' x 4'
ceiling grids – just make one cut to the ceiling tile, posi-
tion the support rail (included), and drop the speaker
into place.
• Finely perforated grille over the entire front of speaker
• Fully enclosed, industrial grade steel construction
• Enclosed Back Can
• 8'' main cone with secondary high-frequency cone
• Low-Impedance: 8-ohm speaker, 15W max. power
• Seismic attachment points
• Listed to UL Standard 1480 for for U.S. use
• Support Rail Crossbar (included)
• Available in Off-white and Bright White ("U" versions)
grille finish
CSD2X2L ( U ) CSD2X2L ( U )
*Listed to UL Standard 1480 for U.S. use
Plenum-Rated
and Listed to
UL-1480
*