Pre-heating, So ld er in g – Mag Layers USA RT22P04 User Manual
Page 5
Advertising
Reflow Soldering
Natural
cooling
260°C
Time(s)
Te
m
pe
ra
tu
re
(°
C)
●
IR Reflow soldering :
Preheat at 3
℃
per second to 160
℃
and using lead free solder ,
IR at 260
℃
for 10 seconds.
●
Rework flow:
Component must withstand two IR reflow cycles with a cool down
between cycles
●
Temperature is measured at the terminal portion of product
(Using thermocoupler for measurement).
●
This profile is reference data we recommend. Please check in your
actual process.
●
For reliable soldering, the thickness of solder paste screen should
be over the terminal co-planality.
●
The cutted end of terminal has no plating
(out of subject of solder ability).
160°C
53sec TYP.
3°C /sec MAX.
Pre-heating
60sec MIN.
120sec MAX.
2.5°C /sec MAX.
-3°C /sec MAX.
So
ld
er
in
g
Advertising