MAMAC Systems TE-702 User Manual
Rohs, Technical information, Duct temperature sensors
SPECIFICATIONS
For Additional Information See TE-701/702 Data Sheet
8189 Century Boulevard • Minneapolis, MN 55317-8002 • USA
800-843-5116 • 952-556-4900 • Fax 952-556-4997
[email protected] • www.mamacsys.com
Model TE-701/702
Technical Information
TI.701/702-03
DUCT TEMPERATURE SENSORS
RoHS
Platinum RTD Sensors:
±0.1% @ 32°F (0°C), Alpha: 385 per DIN 43760
Nickel RTD Sensors (#2):
±0.5°C @ 0°C (32°F), 5,000 PPM/K T.C.R.
Nickel RTD Sensors (#4):
±0.5°F @ 70°F (21.1°C), 6,000 PPM/K T.C.R.
Balco RTD Sensors:
±0.5°F @ 70°F (21.1°C), 4,300 PPM/K T.C.R.
Thermistor Sensors:
±0.2°C interchangeability @ 77°F (25°C)
Operating Temperature:
-40°F to 210°F (-40°C to 100°C)
Ambient Temperature:
-40°F to 160°F (-40°C to 70°C)
Probe Material:
1/4" (6.3 mm) O.D., 0.020" (0.5 mm) wall, 304 Stainless Steel
Flange Material:
Galvanized Steel
Bulkhead Fitting:
Brass with poly compression sleeve
Plastic Enclosure:
Polycarbonate 30% glass filled, rated UL 94V-5-0
Steel NEMA-1 (IP-30):
18 Ga. Galvanized Steel
Steel NEMA-4 (IP-65):
18 Ga. Cold Rolled Steel, Powder coated
Warranty:
Five Years (Lifetime on Moisture Migration)
EMC Conformance:
EN 55022, 55024, 61000-3-3, 61000-4-2, 61000-4-3,
61000-4-4, 61000-4-5, 61000-4-6 & 61000-4-11
U.S. PATENT NO. 6457857, 6555748, 7036224
ORDERING INFORMATION: TE-701-
INSTALLATION
TEMP SENSOR
PROBE LENGTH
A
Flange mount
3" (175 mm)
wire leads
B
Flange mount
6' (1.8 m)
plenum cable
C
Bulkhead mount
3" (175 mm)
wire leads
D
Bulkhead mount
6' (1.8 m)
plenum cable
A
4" (100 mm)
B
6" (150 mm)
C
8" (200 mm)
D
12" (300 mm)
1
100-Ohm Platinum RTD
2
1,000-Ohm Nickel RTD
(5,000 PPM)
3
1,000-Ohm Platinum RTD
4
1,000-Ohm Nickel RTD
(6,000 PPM)
5
1,000-Ohm Balco RTD
7
10,000-Ohm NTC Thermistor
(Type III)
8
10,000-Ohm NTC Thermistor
(Carel)
10
3,000-Ohm NTC Thermistor
12
10,000-Ohm NTC Thermistor
(Type II)
13
5,000-Ohm NTC Thermistor
14
1,035-Ohm Silicon PTC
15
100,000-Ohm NTC Thermistor
16
10,000-Ohm NTC Thermistor
...... ..
(Eliwell)
17
20,000-Ohm NTC Thermistor
18
2,252-Ohm NTC Thermistor
21
1,800-Ohm NTC Thermistor
1
100-Ohm Platinum RTD
2
1,000-Ohm Nickel RTD
(5,000 PPM)
3
1,000-Ohm Platinum RTD
4
1,000-Ohm Nickel RTD
(6,000 PPM)
5
1,000-Ohm Balco RTD
7
10,000-Ohm NTC Thermistor
(Type III)
8
10,000-Ohm NTC Thermistor
(Carel)
10
3,000-Ohm NTC Thermistor
12
10,000-Ohm NTC Thermistor
(Type II)
13
5,000-Ohm NTC Thermistor
14
1,035-Ohm Silicon PTC
15
100,000-Ohm NTC Thermistor
16
10,000-Ohm NTC Thermistor
....... .
(Eliwell)
17
20,000-Ohm NTC Thermistor
18
2,252-Ohm NTC Thermistor
21
1,800-Ohm NTC Thermistor
INSTALLATION
TEMP SENSOR
PROBE LENGTH
ORDERING INFORMATION: TE-702-
A
Polycarb Plastic
Enclosure (IP-54)
B
Galvanized Steel
Enclosure
(NEMA-1 / IP-30)
C
Painted Steel
Enclosure
(NEMA-4 / IP-65)
A
4" (100 mm)
B
6" (150 mm)
C
8" (200 mm)
D
12" (300 mm)
Example: TE-701-B-10-A: Flange mount with 6' cable, 3K ohm thermistor and 4" probe.
Example: TE-702-A-3-D: Polycarb plastic enclosure with 1K ohm Platinum RTD and 12" probe.