Mark Feldstein & Associates Flameless LED Poinsettia - Manual

Maumee, Ohio 43537 • www.markfeldstein.com
LED Poinsettia Planter Instructions
1. Install 2 “AA” batteries (included) into the battery compartment located on the bottom
of planter. Make sure that the battery polarity (+/-) is as indicated.
2. Use the On/Off-Timer* switch on the bottom of the planter to turn LEDs to ON, OFF
or TIMER (6 hour) position.
3. If not set to TIMER position, switch to OFF position when not in use.
*PLEASE NOTE
Built-in Automatic Timer Function. When switch is set to the TIMER position, the LEDs
will turn on for 6 hours and then automatically turn off for a period of 18 hours. If the
timer function settings are not changed, the LEDs will automatically turn on and off at
the same time each day.
BATTERY NOTICE
1. Do not mix old and new batteries. Do not mix alkaline, standard (Carbon-Zinc), or
rechargeable (Nickel Cadmium) batteries.
2. Replace both batteries at one time.
3. To avoid leakage or explosion, do not put batteries in fire.
4. Remove batteries if consumed or if product is to be left unused for a long period of time.
5. Clean the battery contacts and also those of the devices prior to battery installation.