Mark Feldstein & Associates Christmas Carol Clock Display - Manual

slotted side flap
FIG. 1 : Open Base to a square shape.
Turn upside down on floor.
Fold slotted side flaps.
Fold in back and front angled flaps
into slots of side flaps.
A
B
FIG. 2 : Set base upright on floor.
Fold in side panels A.
Fold front step B back
as shown, inserting tabs
into slots in side panels of base.
Tray
FIG. 3 : Remove tray filled with clocks.
Reinforce tray side flaps, top flaps and
bottom with additional tape.
Set tray on base.
Header
FIG. 4 : Fold side panels of header back as shown.
Insert bottom side flaps of header into slots
along top edge of tray, and slide down
until header is flush with top of tray
1 2
3 4
SET UP INSTRUCTIONS