Mark Feldstein & Associates Roll-Up Piano - Manual (Page 11)

Reminders Before Use:
1. Before using, make sure to put the Roll Up Piano on a surface that is flat, dry and
clean. To avoid damage, please do not put Roll Up Piano on any surface that is
rough, wet or dirty.
2. When using an adapter, make sure to use the correct one (6-Volt Adapter). Insert
the DC plug into the DC socket or it may damage the Roll Up Piano.
3. Remove battery cover and insert 4 “AA” batteries (not included) according to
proper polarity (+/-). All batteries must be of the same type. Do not mix
standard (Alkaline) or rechargeable (Cadmium) batteries. Dispose of batteries
properly. Do not use old or worn batteries. To avoid leakage and explosion, do
not put batteries in fire. Remove the batteries if product is to be left unused for a
long time. Clean the battery contacts prior to battery installation.
4. Press Power switch (o) to turn on or turn off the Roll Up Piano.
5. Press the function keys UP (↑) DOWN (↓) to select the desired tones. Please
refer to Tone Table (attached) for details.
6. All standard headphones are compatible with the Roll Up Piano. Insert
headphone plug into headphone jack for quiet play.
7. For better tone quality and pitch, use external amplifiers such as speakers on a
computer or any general amplifying system.
Page 9