Mark Feldstein & Associates Rosemary Millette December Dawn Cardinal Sound Clock with Cardinal Sounds 8IN - Manual

OPERATIONS MANUAL
8-Inch Rosemary Millette December Dawn Cardinal Song Clock
SETTING THE TIME
1) Insert 3 “AA” size batteries (not included) into the battery compartment. Make sure that the battery
Make sure that the battery polarity (+/ -) is
polarity (+/-) is as indicated.
2) Turn the handset knob to adjust to desired time.
HOURLY SOUND
Hear a beautiful Cardinal song at the top of each hour.
Test Button
LIGHT SENSOR (CDS)
This clock has a silence function controlled by a light sensor positioned above the 12 o’clock position. The light sensor
automatically turns the sounds off when the room is dark. If the sounds are low, please move to a brighter area
of the room.
GENERAL INFORMATION
To clean the outside surface, use a clean, dry, soft cloth to wipe away fingerprints or dust.
Do not use any solvents or abrasive cleaners or polish.
BATTERY NOTICE
1) Do not mix old and new batteries. Do not mix alkaline, standard (Carbon-Zinc), or rechargeable (Nickel Cadmium)
batteries. To avoid leakage or explosion, do not put batteries in fire.
2) Replace the batteries if the timekeeping becomes erratic or hourly carols become abnormal, as this may be an
indication that batteries are becoming worn out.
3) Remove the batteries if product is to be left unused for a long time. Clean the battery contacts prior to battery
installation.
4) Worn batteries should be recycled or disposed as per state and local guidelines.
Batteries not included. Country of origin: China
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and the receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Modifications not approved by the party responsible for compliance could void user’s authority to operate this unit.
Maumee, Ohio 43537
•
www.markfeldstein.com