Mark Feldstein & Associates Air Hover Hockey - Manual

+
_
_
+
Air Hover Hockey Instructions
Take your Air Hover Hockey anywhere! Using the
included strikers, hit the air hover puck across any flat
smooth surface into your opponent’s goal.
Battery Instructions
1. Use a phillips screwdriver to loosen the screw (A) and
open cover of battery compartment on bottom of puck.
2. Insert 2 AAA batteries (not included) making sure
polarity (+/-) is as indicated (B).
3. Replace battery cover and secure with phillips screw.
Operating Instructions
1. To turn on, slide On/OFF switch on bottom of puck to
ON position (C).
2. Place puck on flat, smooth surface such as a table
or floor.
3. Puck will hover over surface and is now ready to be
used for traditional arcade-style Air Hover Hockey, or
use your imagination to create your own games.
4. To turn off, slide ON/OFF switch to OFF position (C).
(A)
(B)
(B)
AAA BATTERY
AAA BATTERY
(C)
Battery Notice: Do not mix old and new batteries. Do not mix Alkaline, Standard
(Carbon-Zinc) or rechargeable (Nickel-Cadmium) batteries . Remove batteries
when item is not in use for long periods of time. Replace both batteries if puck
stops working. To avoid leakage or explosion, do not put batteries in fire. Clean
the battery contacts and those on the device prior to battery installation.
AGES
six and
up.