Mark Feldstein & Associates SP4080 Wireless Indoor Outdoor Speakers - #SP4080 User Manual
Page 4
INSTALLATION
TRANSMITTER
1.
Plug the supplied 8V AC/DC power adaptor in the DC jack located on the
rear of the transmitter.
2.
Connect the supplied 8V AC/DC power adaptor to an electrical wall outlet.
The Power LED then glows.
3.
The transmitter can be connected to audio output jack of TV, Monitor, VCR,
Radio, CD, MP3, VCD or DVD players with the cables provided.
Having finished the above simple wiring, Signal LED glows when the transmitter
detects audio input signal played from the source.
SPEAKER RECEIVERS
1.
Remove the door of the battery compartment.
2.
Insert 6 pieces of ‘AA’ size ALKALINE batteries into the battery compartment
with correct polarity under the speakers, then replace the door of battery
compartment, or connect the provided AC/DC 9V Adaptor to the DC input
jack under the speakers, then plug it to the wall AC outlet.