Installation – MARVEL Scientific 17CAF User Manual

Page 5

Advertising
background image

INSTALLATION

Setting the Temperature Control

Cleaning

• Wash any removable parts of the freezer interior, and exte-

rior with mild detergent and warm water. Wipe dry. DO NOT

USE HARSH CLEANERS ON THESE SURFACES.

• Do not use razor blades or other sharp instruments, which

can scratch the appliance surface when removing adhesive

labels. Any glue left from the tape can be removed with a

mixture of warm water and mild detergent, or touch the resi-

due with the sticky side of tape already removed. DO NOT

REMOVE THE SERIAL NAMEPLATE.

Door Removal (see Figure 5 below)

If the door must be removed to fit through narrow doorways, UN-

PLUG THE UNIT.

1. Gently lay freezer on its back, on a rug or blanket.

2. Remove the two grille screws and grille. Remove wire from

clips on bottom of cabinet.

3. Unplug connector, if required, by holding the cabinet connec-

tor in place, and pulling the door connector out.

4. Remove the bottom hinge screws.

5. Remove the plastic top hinge cover.

6. Remove the top hinge from cabinet.

7. Remove the door and bottom hinge from the cabinet.

8. To replace the door, reverse the above order and securely

tighten all screws to prevent hinge slippage.

Figure 6

Figure 5

Cool Down Period

• For safe content storage, allow four (4) hours for freezer to

cool down completely. The freezer will run continuously for

the first several hours. Contents that are already frozen may

be placed in freezer after the first few hours of operation.

Unfrozen contents should NOT be loaded into the freezer un-

til freezer has operated for four (4) hours.

• When loading the freezer, freeze only three (3) pounds of

commodities per cubic foot of freezer space at one time. Dis-

tribute packages to be frozen evenly throughout the freezer.

It is not necessary to turn the control knob to a colder setting

while initially freezing commodities.

Temperature Control

The temperature control (see Figure 6 above) is located inside the

freezer. The temperature is factory preset to provide satisfactory

content storage temperatures. However, the temperature control

is adjustable to provide a range of temperatures for your personal

satisfaction. If a colder temperature is desired, turn the tempera-

ture control knob toward COLDEST and allow several hours for

temperatures to stabilize between adjustments.

5

Advertising