Mayline Sorters & Sorter Shelving - Manual

Kwik-File, LLC
Sorter and Sorter
Shelving
INSTRUCTIONS
1. Place sorter with the top side down on a non-abrasive surface.
2. Locate plastic package containing double faced tape.
3. Clean both surfaces where double-faced tape is to be applied. Use any common
cleaning agent to remove traces of grease or dirt. Surface must be dry before applying
tape. Use only the 3M 4416 double-faced tape provided.
4. Refer to Figure 1. Apply tape as show to bottom of sorter.
NOTE: It is the responsibility of the end user to follow all specific local, state and
federal occupational safety and health standards applicable in the workplace.
Extra installation support (anchors) may be necessary in some areas.
5. Install shelves per instructions on reverse side of this sheet.
TAPE